deckwise-hidden-deck-fasteners-dwcb-ex4-sbl-525-8×2-bl-c3_1000
1583
xextreme4-fastener-contraction-diagram.jpg.pagespeed.ic.dnRb5b15Jx
xextreme4-fastener-expansion-diagram.jpg.pagespeed.ic.NKEs8a3EPJ
xextreme-fastener-composite-diagram.jpg.pagespeed.ic.lsfIkH_R07
xextreme4-fastener-expansion-contraction-diagram.jpg.pagespeed.ic.SB_VeMWqNP
deckwise-hidden-deck-fastener-new__18250.1541965359
423477.1
1050 Ipe Clips
IMG_20201114_143612
IPE Clip Extreme Hidden Deck Fastener
Use With Exotic Hardwoods, Thermally Modified Softwoods
& Composite Decking
Do It Once, Do It Right, Do It Out Of Sight
Summary
Use With Exotic Hardwoods, Thermally Modified Softwoods
& Composite Decking.
Features:
• Automatically spaces deck boards at 5/32″ (4mm)
• Manufactured from polyethylene with stainless steel; black oxide insert
• For use with air/kiln dried hardwood, composite, or PVC decking
• Allows for contraction of width of air dried hardwoods
• Allows for expansion of width of kiln dried hardwoods
• Allows movement of length with composite/PVC decking
• Unique design allows for more tolerance in grooved side profile while
increasing hold-down area
• UV resistant • Limited Lifetime Warranty
Facts
Decking Compatibility
| Board Thickness | Board Width |
|---|---|
| A* = Measurement Of Your Decking | B** = Measurement Of Your Decking |
Groove Dimensions
Thickness of Cut |
Cutting Height |
Cutting Depth |
|---|---|---|
| C = 5/32″ (4mm) | D*** = (A-5/32″)/2 | E = 1/2″ (13mm) |
Board Spacing
| During Installation |
|---|
| F**** = 5/32″(4mm) |
* If using 1-1/2″ or thicker material, you may need to upgrade to a longer screw option
than what is typically packaged with the fastening kit.
** For decking 8″ (20,32cm) or wider, the (A) dimension should be at least 1-1/2″ (38,1mm). Using a wide plank such as this for surface decking will most likely cause cupping issues regardless of how the material is fastened if thicker material is not used.
*** This formula will create a symmetrical profile that allows you to flip and/or rotate the decking to be able to put the best side up.
**** Fastener automatically achieves correct gap spacing when boards are pushed tight during installation
